Fieldcenter Inc

Dampers (2mm fitting) for Mimaki, Roland and Mutoh printheads. These are solvent resistant. It is recommened that you change the dampers and O-rings with every head change. Dirty dampers impede the flow of ink and you'll get frequent drop-outs, missing jets and ink starvation. Eventually, neglected dampers will damage to the printhead because of overheated jets. If you have a problem where the ink constantly gets drained out of the dampers and ink lines – back into the cartridge, you have an air leak. Replacing the O-Ring and screw usually cures this problem. Remember that each printhead uses 2 dampers!

Brand:
Generic

Printer compatibility:
Roland FJ/SC/SJ/SP series, Mimaki JV3/JV22/JV4, Mutoh RH II/Spitfire/Falcon/RJ8000

Part number:
PDAEP10002

Datasheet (PDF)